BOB's XLT PROGRAM
BASIC ADJUSTMENTS
BOB's XLT PROGRAM
BASIC ADJUSTMENTS
| Target Volume | 60 | Sets desired loudness of target response. |
| Audio Threshold | 3-6 | Sets threshold loudness or hum for comfortable listening |
| Tone (Audio Freq.) | 173 | Adjust threshold tone or pitch |
| Audio Disc | On | On for disc response off for all metal mode |
| Silent Search | OFF | On for threshold off for no threshold |
| Mixed-Mode | OFF | Off for discrimination or A.C. response On for all metal (DC) and disc (AC) response. |
| A.C. Sensitivity | 77 | Discrimination sensitivity |
| D.C. Sensitivity | 30 | All metal and pinpoint sensitivity |
| Backlight | 0 | 0 is off 1 - 6 is on at different lighting levels |
| Viewing Angle | 25 | Adjustment makes display easier to see at different temperatures |
| Ratchet Pinpoint | Off | Automatically detune the loop when pinpointing |
| S.A.T. Speed | 7 | Adjust threshold auto tune speed only in no disc or mixed mode no effect in disc |
| Tone I.D. | On | Identifies targets by assigning each vdi # a separate tone |
| V.C.O | On | In all metal or pinpoint, as loop approaches target the volume will go up as well as the pitch of the sound. |
| Absolute Value | Off | Big foot coil option |
| Modulation | On | Gives full volume on all targets….shallow targets may break up in sound if used in the setting. Set to off when silent search is on |
| Autotrac | On | Turns autotrac on or off good for maintaining a fixed ground balance |
| Trac View | Off | Allows user to see when the machine tracks |
| Autotrac Speed | 8 | How fast the machine will adjust to the ground when autotrac is on |
| Trac Inhabit | On | Stop ground tracking over targets |
| Coarse G.E.B | 47 | Adjustment of coarse geb (turn auto track off) |
| Fine G.E.B. | 216 | Adjustment of fine geb (turn auto track off) |
| Disc. Edit | -96 to +95 | Allows user to accept or reject vdi numbers one at a time or to scroll through disc setting |
| Block Edit | -96 to +95 | accept -40 to +94 accept +95 if no hot rocks gives more depth will also make targets sound better.. if you can stand it |
| Learn Accept | Off | On lets the disc accept targets that are swept in front of the loop |
| Learn Reject | Off | On lets the disc reject targets that are swept in front of the loop |
| Recovery Speed | 20 | How fast a machine recovers for the next target to high a setting you'll loose depth to low a setting and you get bad target separation |
| Bottle cap Reject | 1 | Higher numbers more iron rejection a setting of 1 makes nickels sound better |
| Visual Disc. | Off | Lets you see all the vdi numbers accepted or rejected |
| Icons | Off | On shows the icon off turns icon off and speeds up display |
| V.D.I. Sensitivity | 85 | How sensitivity the display is to the target 86 and higher give 3 digit vdi |
| D.C. Phase | On | Gives a dc phase vdi number for the target |
| Graph Averaging | On | Accumulates targets on the display |
| Graph Accumulate | On | Accumulates targets on the display |
| Fade Rate | 11 | How fast the display will fade or go down ,,, 0 resets after each target |
| Transmit Boost | On | Usually on may be better for beach (saltwater) if off |
| Transmit Frequency | 4 | Can be used to stop interference from other whites detectors or maybe even electrical interference |
| Pre-amp | 5 | Adjust the gain of the pre amp setting of 1 is below unity |
| Coins | Factory preset program |
| Coin & Jewelry | Factory preset program |
| Jewelry/ Beach | Factory preset program |
| Relic | Factory preset program |
| Prospecting | Factory preset program |
| Custom Program 1 | User storage area for a program that can be named and saved. |
| Custom Program 2 | User storage area for a program that can be named and saved. |
| Custom Program 3 | User storage area for a program that can be named and saved. |
| Custom Program 4 | User storage area for a program that can be named and saved. |
This page was created on November 14, 1997. If you find serious errors or care to make comments or criticisms just send me e-mail at: canaday@rtinet.com